K-JET 60C floor Lamination

PRODUCT

Composition: 170um PVC Film + Permanent glue + 120gsm release paper with green lines

Size:
Width: 1.07/1.37/1.52m
Length: 50m

FEATURES

Usage: To avoid the image (print face) being scratched, polluted or wet, to protect the picture. Good waterproof effect, good protection screen, indoor use, high transparency, strong viscosity, mounting and paste.

Application Range
It is widely used for the protection lamination film of floor graphics with anti-skid performance.

APPLICATION SUGGESTION

Pay attention to the pressure on both sides of the mounting machine to avoid air bubbles or wrinkles.
Protect the ends of the material after opening, avoid damage caused by extrusion.
Mount the film after the printing images are totally dry.
The printed materials to be laminated should be smooth.
It cannot be used to too rough materials. During the seasonal transition, pay attention to use the materials first which were produced earlier.

STORAGE CONDITIONS

All Desert Sign Products always need to be stored in their original packing and with the original protection materials, preferably stored hermetically and vertically, do not expose to direct sunlight or heat sources. In order to avoid loss of quality, Desert Sign products should also be stored in suitable conditions, that is at a temperature of 23?C ? 5?C and a relative humidity of 50 ?5%. Under these conditions, Desert Sign products can be stored up to one year.